Epoxy Flooring in Farragut, TN

Knox Epoxy Pros serves Farragut and West Knox County, where the housing stock is new enough that most slabs go straight to grinding. Epoxy flooring and garage floor coatings for Farragut and West Knox County.

Farragut is an incorporated town at the western edge of Knox County, where Kingston Pike runs out toward the Fort Loudoun Lake shoreline. It is one of East Tennessee's most affluent communities — a planned town incorporated in 1980 and built almost entirely from the 1980s onward, anchored by the Turkey Creek retail corridor and a string of golf-course and lakeside subdivisions.

We install garage floor coatings, basement floors, and decorative concrete across the town and the surrounding West Knox County area. Because Farragut's housing stock is newer than almost anywhere else we serve, an epoxy flooring project in Farragut tends to look different from a typical older-Knoxville job.

Garage floor coatings in Farragut

A garage floor coating is the most-requested project in Farragut, and the slabs here make it a straightforward one. Subdivisions like Fox Den, Village Green, and the Concord-area developments were poured from the 1980s on, so the concrete is generally sound and modern — Farragut projects are almost always cosmetic upgrades rather than concrete rescues, with standard diamond grinding and light joint work rather than heavy crack repair.

Farragut also has some of the largest garages we coat. Three-car attached garages are common, and larger square footage actually lowers the per-square-foot cost — a two-car flake epoxy floor runs roughly $2,300 to $4,500, while a three-car bay spreads the fixed setup cost across more area. Homeowners here lean toward the decorative tiers: multi-color flake and metallic systems. Because a floor coating is an interior finish, it does not require HOA architectural-committee approval in Farragut's deed-restricted subdivisions.

Lakeside homes and walkout basements

Farragut runs down to the Fort Loudoun Lake shoreline around Concord and Admiral's Landing, and the sloped lakefront lots there produce walkout basements, daylight lower levels, and basement-level garages far more often than the flat subdivisions inland. Below-grade slabs on a lakeside slope can take on vapor from the uphill side, so a moisture test is the firm first step on any Farragut basement or boat-storage garage — a coating applied without it will lift.

Either way, the quote is based on an on-site look at your concrete, never sight-unseen pricing. For a full pricing breakdown by system and garage size, see the Knoxville epoxy flooring cost guide.

What a garage floor coating costs in Farragut

A two-car Farragut garage runs $2,300 to $4,500 in flake epoxy, $2,800 to $6,500 in polyaspartic, and $3,600 to $8,000 in a decorative metallic. Because Farragut's slabs are typically newer and sound, more of that number goes into the coating itself and less into repair — which is why the finish upgrades get chosen here more often than anywhere else we work.

Three-car and oversized garages are common in Farragut and price per square foot rather than per bay; the epoxy calculator will size yours before you call, and the Knoxville epoxy flooring cost guide explains what moves the number.

Decorative finishes and lakeside exteriors

Farragut is where the metallic system gets specified most. On a sound, modern slab there is no prep obstacle to a hand-worked marbled floor, and the finish suits the finished-basement and bonus-room spaces the newer subdivisions have.

On the Fort Loudoun side, exterior concrete is the other common request — patios, pool decks and covered porches. Those need a UV-stable polyaspartic coating; bare epoxy ambers in direct sun. We coat existing concrete rather than pouring new slabs. Beyond the town limits we cover Concord, Hardin Valley and the Turkey Creek corridor.

What we coat in Farragut, and what we do not

We coat existing concrete: garage floors, basements, patios, pool decks and covered porches, in epoxy, polyaspartic and metallic systems.

What we do not do: we coat existing concrete, but we do not pour, pave, replace or level it, and we do not do foundation work. Paver patios, hardscaping and new concrete pours are a different trade — if that is the project, a Farragut landscaping or concrete contractor is the right call rather than us. A slab that is settling, or a crack running from a wall into the floor that is still moving, is a structural problem — a coating hides the symptom rather than fixing it, and we will say so on the walk.

Floor coatings we install in Farragut

Every system we offer across East Tennessee is available in Farragut. Each links through to a full breakdown of the system, finishes, and pricing:

Not sure what a project runs? The Knoxville epoxy flooring cost guide breaks pricing down by system and by garage size.

Farragut questions

Do you serve Farragut and West Knox County?

Yes. Farragut, Concord, Hardin Valley, and the surrounding West Knox County subdivisions are all within our service area. Mention your neighborhood when you call so we can plan the visit.

Does a garage floor coating need HOA approval in Farragut?

No. A floor coating is an interior finish, so it falls outside the exterior architectural review that Farragut's deed-restricted subdivisions apply to things like fences, paint colors, and additions. You do not need committee sign-off to coat your own garage floor.

How much does a three-car Farragut garage floor cost?

A three-car flake epoxy floor typically runs in the $3,500 to $6,500 range, and the per-square-foot cost is actually lower than a two-car garage because the fixed setup cost spreads across more area. Decorative metallic and full polyaspartic upgrades add to that. An on-site measurement gives you an exact figure.

Can you coat a pool deck or patio in Farragut?

Yes, in a UV-stable polyaspartic system — bare epoxy ambers in direct sun, which rules it out for anything uncovered. Pool surrounds also get a slip-resistant broadcast in the topcoat. We coat existing concrete; we do not pour new patios or replace failed slabs.

Can you do a metallic epoxy floor in a Farragut basement?

Yes, and Farragut is where we install the most of them. Newer subdivision slabs are sound enough to go almost straight to a decorative finish. A basement still gets a moisture test first, and usually a polyaspartic topcoat over the metallic so it holds up to daylight and traffic.

Get a free quote

Tell us about your floor and we will measure the space, inspect the concrete, and put a full written quote in front of you — no sight-unseen pricing.

Call (865) 459-3144 or see every community we cover on our service area page.

Last updated: May 20, 2026